How to Install LAVNA LA14 Smart Door Lock on Doors—Step-by-Step Guide

Placing a smart lock may be technical, yet it is so easy with appropriate instructions, and it is rewarding. The LAVNA LA14 Smart Door Lock is very easy to install on the wooden doors and is ideal for any individual who is upgrading his or her home security. We will take you through the complete process of unboxing, testing, and installation so that you can install it with no fear of failure.

In LAVNA Locks, the priority is on integrating smart technology with daily life functionality. Let’s get started.

What you are going to need before installation:

• LAVNA LA14 Smart Lock kit

• Screwdriver and drill machine

• Measuring tape, pencil, or marker

• Fully charged lock batteries

Additionally, make sure that the thickness of your door is compatible with the lock (typically 30-60 mm on wooden doors);

Step 1: Mark the Lock Position

• Attach the drilling template in the box to your door at the required height (typically around 1 metre off the floor).

• Draw in the holes with a pencil.

• Proper marking is a guarantee of smoothing down in the future.

Step 2: Bore the holes that are needed.

• With a drill machine, holes are to be made in line with the marked points.

• Make sure the hole on the main is deep enough to hold the body of the lock.

• Side holes are straight to allow alignment of handles.

• Dust off the holes and then proceed to the next step.

Step 3: Fit Mortise Lock Body

• Insert the lock body on the side of the door.

• Install it with the screws in the box.

• Make sure that it is placed in a straight and level position and lies against the door surface.

Step 4: Attach the Front Panel

• Install the front panel (including fingerprint sensor and keypad) at the exterior of the door.

• Use the connecting wire, pass it through the hole, and attach it to the back panel.

• At this point, fit the panels and screw them slightly.

Step 5: Install the Back Panel

• Attach the back panel on the inside of the door.

• Make sure there is a proper connection of wires.

• Panels are aligned

• Screws are not tightened.

• After having done this, place the batteries in the back panel.

Step 6: Install the lock digitally.

To turn on the lock and use the voice control to do the following:

• Register your fingerprint

• Set a PIN code

• Connect the mobile app

This action transforms your standard door into a Bluetooth smart door lock that has security features of the current times.

Step 7: Test the Lock

• Test all unlock methods:

• Fingerprint

• PIN

• Mobile app

• Manual key

• Make sure that the door opens and closes easily.

• When necessary, make the strike plate on the door frame perfectly aligned.

Download the app now: 

What is so great about the LAVNA LA14 Smart Lock?

The LAVNA LA-14 works as a fingerprint digital door lock that allows fast and convenient keyless entry. It is perfect as a smart lock for main door, which is safe and convenient. It can also be used as a smart lock in homes and apartments with its smooth design and high level of security.

To individuals constructing a connected home, it is a trustworthy smart home door lock, and it will blend with your way of life and your day-to-day activities. And by its precise sensor, it works like a fingerprint door lock even with normal usage.

Easy to install and fitted with user-friendly controls, this is a long-term product of LAVNA Locks that will guarantee long-term reliability and peaceful usage.

Maintenance Tips

• Clean the fingerprint sensor once a week using a dry cloth.

• Change batteries when the low-battery notification comes out.

• Do not expose the sensor and the keypad to water.

• Store the mechanical key where it cannot be lost.

Simple steps to install LA14 locks: 

1- Marking & Drilling: Use the provided LAVNA Locks cutting diagram to mark the exact points on your door. Accuracy here ensures a smooth fit for the mortise and panels.

2- Mortise Setup: Learn how to adjust the mortise latch direction based on whether your door opens inwards or outwards.

3- Handle Orientation: We demonstrate how to quickly swap the handle direction on the LAVNA LA14 panels to match your door's hinge side.

4- Panel Integration: Connecting the front and back panels using the spindle rod and securing them with the internal fasteners.

5- Battery Installation: The LA14 is powered by 4 AAA batteries. We recommend using high-quality Duracell batteries for long-lasting performance.

6- Final Testing: A crucial step to verify the locking mechanism using both the smart handle and the emergency mechanical keys.

FAQs

1. Can I install the LA14 lock myself?
Yes, you can install it yourself with step-by-step guidance and professional support via video call if needed.

2. Will the lock be activated in case of power failure?
Yes, it runs on batteries. The mechanical key or emergency power port can be used in case the batteries are empty.

3. Can I install the LA14 lock myself?

Yes, you can install it yourself with professional support or video call support.

4. What is the capacity of fingerprints that can be stored?

The LAVNA LA14 smart lock has a storage capacity of up to 50 fingerprints.

Conclusion- 

There is no need to make a smart lock installation a complex task. And in a jiffy you can lock your door, with due precautions and a small amount of care. The LAVNA LA14 Digital Door Lock is the one that allows you to be safe and stylish and control it smartly, all in a single device. And if you have the help of LAVNA Locks, you can rely on your home security upgrade to be easy and efficient.